5V 12V 24V 1 2 4 8 16 Channel Relay with Optocoupler - Asia Sell

  • $24.50
Tax included. See the Shipping Rates Table. Calculated at checkout (combined weight and service dependant). Free shipping for orders over $50.
0 in stock This item is yet to be reordered. You are welcome to place an order and we will order more right away. You can click the bell at bottom left to be notified when the item is back in stock.

DESCRIPTION

  • 1 piece.
  • 5V 12V 24V 1 2 4 8 16 channel relay with optocoupler - Asia Sell.

    1 channel relay module

    • Maximum load: AC 250V/10A, DC 30V/10A.
    • Trigger current: 5mA.
    • Working voltage: 5V 12V.
    • Module size: 50 x 26 x 18.5mm (L x W x H).
    • Four mounting bolts holes, diameter 3.1mm.
    • DC+: positive power supply (VCC).
    • DC-: negative power supply (GND).
    • IN: can be high or low level control relay.
    • NO: normally open relay interface.
    • COM: Common Interface Relays.
    • NC: normally closed relay interface.

     

    2 channel relay module

    • Dimensions: 50.5mm (length) * 38.5mm (W) * 18.5 (H).
    • Board four weeks with four screws holes, hole diameter 3.1mm, easy to install and fixed.
    • Relay of high quality loose music relays SPDT. A common terminal, a normally open, one normally closed terminal.
    • Optocoupler isolation, good anti-jamming.
    • Low pull, high release. Energisation status indicator light, release status LED is off.
    • VCC of system power, JD_VCC relay power. You can plug in jumpers.
    • Supply voltage: 5VDC, 12VDC.
    • Current: more than 100mA.
    • Load: 250V 10A AC or 30V 10A DC.
    • VCC: positive power supply system.
    • GND: System power negative.
    • IN1 - IN2: relay control ports.

    4-channel relay output module

    • Relay output contacts 250A 10A. Input IN1, IN2, IN3, IN4, the signal line LOW effective. VCC, GND power input, can relay a separate power supply relay power input of JD-VCC.
    • Supports all MCU control.
    • PLC control.
    • Smart homecontrol

     

    8 channel relay module

    • High-current relay, AC250V 10A DC30V 10A
    • Contact some independent wiring, safe and reliable
    • Standard interface , can be extended in a variety of development board
    • With fixed screw holes for easy installation
    • Suitable for a variety of platforms such as 51/AVR/AVR/ARM
    • The module complies with international safety standards, the load control area and regional isolation tank ;
    • Double-sided FR-4 circuit board design, high-end chip production process ;
    • The signal input has a low signal, often beginning with a common terminal will be turned on.
    • Normally open normally closed contact 
    • Blue KF301 terminals to the control line is more convenient.
    • Module size : 138m * 56mm * 18.5mm ( L * W * H)
    • 4 fixing bolt holes, hole 3.1mm, pitch 131mm * 49.5mm
    • Finished by 100% functional testing and stability testing
    • VCC: 5V power supply connected to the positive
    • GND: 5V power supply connected to the negative
    • IN1-IN8: trigger signal, active low
    • Relay outputs: a 12- line interface, the interface can be directly connected to all leads
    • NO1 - NO8: normally open relay interfaces , relay before the vacant after the pull shorted with COM
    • COM1 - COM8 Relay Common Interface
    • NC1 - NC8: normally closed relay interface relay shorted with COM ago, after the pull- vacant

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    M
    M.F.
    Always AAA service..Thanks once again!
    Click to edit the product in Ali Orders.
    Note: only show for shop owner