Skip to product information
  • Electronic PVC Heat Shrink 40/55/63/86/95/125mm Tubing For Lipo Battery Insulation Green Heatshrink | Asia Sell  -  125mm
1 of 1

AsiaSell

1m PVC Heat Shrink 23/30/40/50/55/63/86/95/125/150/180/220/260mm Tube Lithium Battery Insulation Heatshrink

Regular price $8.50 AUD
Regular price Sale price $8.50 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
Colour
  • 1 metre.
  • Sizes available 40, 50, 55, 63, 86, 95, 125, 180, 260mm FLAT WIDTH (see below for conversion formula and table).
  • Note: Images show more than 1m.
  • Light green heat shrink tube.
  • Temperature Range:-55~125deg.
  • Rated Voltage: 600V.
  • Colour: Light Green.
  • Low shrinkage temperature. Fast contraction.

 

How to choose the size

  • You open the end of the heat shrink to go over the object. This means that the circumference of the heat shrink you need should be larger than the object you want to fit over. The measurements you are choosing above are the flat widths of the heat shrink. Since you open the heat shrink then the circumference of the heat shrink is twice the flat width. So if your object is 200mm circumference you need a flat width of 120mm approximately (more than half).
  • If you want to convert flat width to round width, multiply flat width by 2/pi.
  • You can use much larger heat shrink because of the large shrinkage ratio of PVC heat shrink. Slowly apply heat due to the low melting temperature of PVC. Even a hair dryer of reasonable quality is hot enough. If using a flame then keep the flame at a large distance away.


      Flat Width (mm)
      Round Width (mm)
      Circumference (mm)
      40 25.5
      80
      55
      35.0
      110
      63
      40.1
      126
      86
      54.7
      172
      92
      58.6
      184
      125
      79.6
      250


          Customer Reviews

          No reviews yet
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)