Skip to product information
  • Raspberry Pi Camera Kit + Case Bracket Holder Enclosure Night Vision 60/130 Degree Infrared Lights Heatsinks FFC Raspberry Pi 4 Model B /3B+/Zero RPI | Asia Sell  -  60 Deg Non-Enclosed
  • Raspberry Pi Camera Kit + Case Bracket Holder Enclosure Night Vision 60/130 Degree Infrared Lights Heatsinks FFC Raspberry Pi 4 Model B /3B+/Zero RPI | Asia Sell
  • Raspberry Pi Camera Kit + Case Bracket Holder Enclosure Night Vision 60/130 Degree Infrared Lights Heatsinks FFC Raspberry Pi 4 Model B /3B+/Zero RPI | Asia Sell  -  Fish Eye Enclosed
  • Raspberry Pi Camera Kit + Case Bracket Holder Enclosure Night Vision 60/130 Degree Infrared Lights Heatsinks FFC Raspberry Pi 4 Model B /3B+/Zero RPI | Asia Sell  -  60 Deg Enclosed
1 of 4

AsiaSell

Raspberry Pi Camera Kit + Case Bracket Enclosure Night Vision 60/130 Degree

Regular price $38.05 AUD
Regular price Sale price $38.05 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
Type
  • OV5647 RPI Camera and Bracket/Enclosure/Surround/Case Kit with IR LEDs for Night Vison.
  • For Raspberry Pi Zero 4B/3B+/ 3B 2. Kit 3 does not include a gold cable for use with Pi Zero.
  • The heatsinks solve overheating problems of IR LEDs with prolonged use.
  • When using, guard against damage by static electricity!
  • Remove the protective film before using the lens.

Kit A

  • 60 degree viewing angle
  • Manual focal adjustment
  • 5 megapixel
  • Lens:1/45M
  • CCD size: 1 / 4inch
  • Aperture (F): 1.8
  • Focal Length: 3.6mm adjustable
  • Diagonal angle: 60 degree
  • Sensor best resolution: 1080p
  • 4 screw holes : used for attachment and connect power ( 3.3V output )
  • Dimension: 25mm x 24mm
  • Metalframe
  • 3.3Vpowersupplyinterfacecanbeaccessedsensitiveinfraredlamporotherdevice
  • Transparentlightsfor1Whighpowerinfraredlightphotoreceptor850
  • Photoresistor:detectingambientlightintensity


Package inclusions

  • 1 x Night Vision Camera
  • 2 xIR Lights
  • 1 x Acrylic Holder
  • 1 x 15 cmRaspberry Pi 3 Camera Cable
  • 1 x 50 cmRaspberry Pi 3Camera Cable
  • 1 x 30 cm Raspberry Pi ZeroCamera Cable
  • 1 x Screw Driver

        How to Use

        • Ensure the raspberry Pi system is the newer version, and open the camera function. Type the command:sudo raspi - configand check the camera function of the fifth.The picture below:

        C02843

        • Select: Enable

        C0284005

        • Then the system return to the interface itself. Choose the ����������������Finish ����������������, it will restart,If it doesn't restart itself , please restart it manually.

        finish3

        • After the raspberry pi system restart , you can use raspberry pi camera now.
        • If you want to take photo, you can run the command :raspistill
        • For example,input: raspistill �������������������������t 2000 -o 1.jpg
        • -t: ( the time of waiting to take the photo ,5000 is five seconds). ������������������������� o 1.jpg (1.jpg is command of file)

          Tips

          Hardware connection

          • Soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.

            Software

            • RPi firmware and raspi-config has been updated to the camera, do a apt-get update; apt-get upgrade;
            • raspi-config, select the camera, start RPi firmware in the camera driver, then reboot
            • Use the command-line program raspivid and raspistill operating camera to capture video clips or images
            • The captured video clip needs to play with mplayer

              Kit B

              • As per kit A but with an enclosed holder.

                Kit C

                • 130 degree fish eye lens
                • For raspberry Pi 4Model B/3B+/3B (separate gold cable required to use the camera with RPI Zero)
                • Daytime images with night vision cameras may appear slightly red
                • 5 megapixel OV5647 sensor
                • CCD size : 1/4inch
                • Sensor best resolution : 1080p
                • Focal length : 2.1
                • Diagonal angle : 130 degree approx
                • 4 screw holes
                • 3.3V power output
                • Supports connecting fill flash LED or Infrared LED
                • FFC (flexible flat cables)
                • Acrylic bracket holder
                • Install heatsinks behind IR lights

                  How to use

                  1. Install Raspbian system into SD card and insert to Raspberry Pi, connect the display to Raspberry Pi, Connect the camera to Raspberry Pi correctly.
                  2. Open the terminal and run
                  3. sudo raspi-config
                  4. Choose the Interface--Enable Camera , enter it , then it the Raspberry Pi will restart automatically ( if not , you can restart it by yourself)
                  5. Open the terminal again , run
                  6. raspistill �������������������������t 5000 �������������������������o test.jpg
                  7. then the camera will be on.The ����������������5000��������������means the camera will open 5 seconds , the ����������������test�������������� is the name of picture , you can change them as your need.

                    Package List

                    • 1 x 130 degree night vision camera.
                    • 2 x LED light.
                    • 1 x Acrylic Holder.
                    • 2 x Heatsink.
                    • 1 x 15cm Camera Cable.
                    • Note: this kit does not contain the screwdriver, the 50cm camera cable or the gold cable for the PI zero. We can order a kit with these items if you ask.

                    Customer Reviews

                    No reviews yet
                    0%
                    (0)
                    0%
                    (0)
                    0%
                    (0)
                    0%
                    (0)
                    0%
                    (0)