100pcs 2mm 3mm 3.5mm 4mm 4.5mm 5mm 6mm 8mm Eyelets Rivets Metal Buttonholes Buckle Clothing Buttons Bronze Chrome Gold Silver Grey Gun Metal Craft

• 100 pieces (choose between 1.5mm, 2.0mm, 3.0mm, 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 8mm Internal Diameter (ID) and between Gold, Silver, Bronze and Gun Metal colours).
• ID means internal diameter. OD means outside diameter.
• 100pcs 1.5mm-20mm Eyelets Rivets Metal Buttonholes Buckle Clothing Buttons Bronze Chrome Gold Silver Grey Gun Metal.
• Bronze, gun metal, gold and silver are colours (not the actual elements).
• Note: 1.5mm and 2mm do not come with backing rings. Other sizes do.
• The rings/washers can be a different colour. They are not visible from under the lip of the eyelet, with the exception of some stock of 6mm gold where silver washers are supplied and they have a larger outer diameter than the gold washers
• Note: the washers can be very hard to count because they sit on top of each other and don't slide off each other easily. If you drop them into a container they will separate and you can count them. Please be cognisant of this when counting the washers.
• Note: we also stock 10mm to 20mm eyelets in the same colours.
• Note: The image for 4mm mixed shows 4 bags of 100pcs but it is 4 bags of 25pcs (total 100pcs). 

ID, OD, lip and depth measurements

ID is internal diameter (the hole in the centre). OD is outside diameter and lip width is rim width.

• 4mm ID: The hole has an OD of 4.5mm and lip width 8mm. Depth of 4.0mm total, including a lip of 0.5mm uncompressed. 
• 4.5mm ID: The hole has an OD of 5mm and lip width 9mm. Depth measured on request.
• 5mm ID: The hole has an OD of 5.5mm and lip width 10mm. Depth measured on request. Depth including lip: have both 3.5mm and 4.0mm currently. If there is a preference then you must ask first because the stocks of the different depths won't last forever. Depth below lip: subtract 0.4-0.5mm from the above.
• 6mm ID: The hole has an OD of 6.5mm and lip width 10.5mm. Depth measured on request.